| No. | Brand | B | d | D | a | B1 | Noun | Seals | UNSPSC |
| HC71919-E-T-P4S | FAG | - | - | 3.5000 in | - | - | - | - | - |
| B7228-C-T-P4S | FAG | - | 4.2500 in | 5.7500 in | - | - | - | - | - |
| B7230-C-T-P4S | FAG | 20 mm | 150 mm | 190 mm | - | - | - | - | - |
| B7202-E-2RSD-T-P4S | FAG | - | - | - | - | - | - | - | - |
| B7205-C-T-P4S | FAG | - | - | 2.7500 in | - | - | - | - | - |
| B71924-E-2RSD-T-P4S | FAG | 18 mm | 40 mm | 80 mm | - | - | - | - | - |
| HC71911-E-T-P4S | FAG | - | 0.5000 in | 1.0000 in | - | - | - | - | - |
| B7222-E-T-P4S | FAG | - | 2.9375 in | - | - | - | - | - | - |
| HC7011-E-T-P4S | FAG | - | - | - | - | - | - | - | - |
| B7208-C-2RSD-T-P4S | FAG | - | 0.1900 in | 0.6250 in | - | - | - | - | - |
| B7203-C-T-P4S | FAG | 3.5700 in | 2.4375 in | - | - | - | - | - | - |
| B7224-E-T-P4S | FAG | 3.5000 in | 3.5000 in | 4.0000 in | - | - | - | - | - |
| B7213-C-T-P4S | FAG | 4-13/64 in | 2.9375 in | 8-1/8 in | - | - | - | - | - |
| B7208-E-2RSD-T-P4S | FAG | - | 2.938 Inch | 74.625 Millimeter | 3.23 Inch | 82.042 Millimeter | - | - | Bearing | Triple Lip Viton | 31171501 |
| HC71922-EDLR-T-P4S | FAG | - | 3.6250 in | 6.0000 in | - | - | - | - | - |
| HC71910-E-T-P4S | FAG | - | - | 3.3500 in | - | - | - | - | - |
| HC7013-E-T-P4S | FAG | - | 15 mm | 31 mm | - | - | - | - | - |
| HC71915-E-T-P4S | FAG | 31 mm | 70 mm | 125 mm | - | - | - | - | - |
| B7204-E-T-P4S | FAG | - | 13.9375 in | - | - | - | - | - | - |
| HC7014-EDLR-T-P4S | FAG | - | 1.0000 in | - | - | - | - | - | - |
| B7215-C-T-P4S | FAG | 2.6300 in | 1.1250 in | 3.1500 in | - | - | - | - | - |
| B7209-C-2RSD-T-P4S | FAG | - | - | 4.3310 in | - | - | - | - | - |
| B71922-E-2RSD-T-P4S FAG high precision bearings | series:Light; static load capacity:8030 lbs; finish/coating:Uncoated; internal clearance:C0; bore type:Straight; number of rows:1; precision rating:Not Rated; D:72 mm; dynamic load capacity:6840 lb; cage material:Steel; closure type:Open; fillet radius:1.02 mm; d:35 mm; ring separation:Separable Inner Ring; bearing material:Chrome Steel; outer ring width:17 mm; B:17 mm; |
| HC7021-EDLR-T-P4S FAG high precision bearings | overall length:1-1/2 in; bearing material:Polyacetal; material specification:80; maximum pv value:2.45 N/mm²; D:1-7/8 in; sleeve bearing type:Flanged Bushing; series:80FN; maximum p value:17.5 N/mm²; operating temperature range:-40 to 176 °F; additional details:Lead Free; d:1-1/2 in; standards met:RoHS; maximum v value:0.85 m/s SFPM; |
| HC71907-EDLR-T-P4S FAG high precision ball bearings | Weight:0.34 lb; misalignment tolerance:0.020 in; pressure tolerance:Ambient; shaft diameter:2.4761 in; lip material:Labyrinth; construction description:ISO-GARD® Flange; typical application:Exceptional Bearing; continuous temperature range:-22 to 400°F; width:0.7500 in; D:3.9370 in; maximum shaft surface speed:4500 fpm; manufacturer catalog number:29502-8325; harmonization code:3926904590.US; |
| B7201-E-2RSD-T-P4S FAG high precision bearings | closure type:Open; compatible pipe size:2-1/2 in; bearing material:POM; outside diameter design:Straight; bore size:1/4 in; maximum pv value:3000; material specification:Delrin, Celcon; bearing outside diameter:2.469 in; bore shape:Round; compatible pipe schedule:40; B:1 in; bearing type:Roll End Plain Beari; operating temperature range:Maximum of +225; |
| HC71924-E-T-P4S FAG high precision ball bearings | inner ring width:0.8660 in; static load capacity:27700 lbf; manufacturer product page:Click here; fillet radius:0.0900 in; d:2.6875 in; operating temperature range:-40 to 250 ºF; cone width:0.8660 in; finish/coating:Uncoated; dynamic load capacity:20200 lbf; manufacturer upc number:4547359533071; bearing material:Case Carburized Stee; |
| B7207-E-2RSD-T-P4S FAG precision ball bearings | series:ECS6; |
| HC71918-E-T-P4S FAG high precision bearings | series:SFC; inner ring width:2-3/16 in; lubrication type:Lubrication Fitting; operating temperature range:-40 to +200 &de; bearing material:Chrome Steel; radial static load capacity:6601 lb; seal type:Felt Seal; finish/coating:Uncoated; maximum rpm:300 RPM; housing width:1-5/8 in; locking device:Set Screw; radial dynamic load capacity:9752 lb; housing material:Cast Iron; expansion type:Non-Expansion Bearin; |
| HC7020-E-T-P4S FAG high precision bearings | misalignment angle:20 º; shank thread size:M20 x 1.5; thread direction:Right Hand; ball material:Alloy Steel; head diameter:46 mm; head width:18.00 mm; ball width:25 mm; d:20 mm; overall height:101 mm; manufacturer catalog:www.aurorabearing.co; harmonization code:8483.30.8055; series:AMF; Weight:0.29 kg; length to ball center:78 mm; thread type:-6g; shank thread length:47 mm; housing material:Carbon Steel; |
| B7214-E-2RSD-T-P4S FAG high precision bearings | Accessories:Shield & Seal & Snap; B:55.60 mm; d:95.000 mm; Sealed Speed Rating n3:2200 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:159000 N; Grease Speed Rating n1:2200 rpm; Oil Speed Rating n2:3200 rpm; Basic Static Radial Load Rating Co:146000 N; D:170.0000 mm; |
| B7208-C-T-P4S FAG precision ball bearings | bearing material:Steel; cone width:0.7812 in; assembly type:Double Row; double row design:Back to Back; abma precision rating:Class 2; d:1.7812 in; manufacturer upc number:053893650654; width over outer rings:1.3434 in; D:3.0625 in; cup width:0.5937 in; |
| B7205-E-T-P4S FAG high precision ball bearings | mounting type:Two-Bolt Flange; lubrication type:Lubrication Fitting; finish/coating:Stainless Steel; D:3.8906 in; locking device:Set Screw; replacement bearing:SUC205-25mm; B:5.1250 in; seal type:FDA approved silicon; overall height:1.4094 in; inner ring width:1.3430 in; expansion type:Non-Expansion Bearin; housing material:Stainless Steel; duty type:Standard Duty; manufacturer catalog:Click here; |
| HC71920-EDLR-T-P4S FAG high precision bearings | length to ball center:2.8750 in; d:0.7500 in; rod end type:Male Threaded with M; radial static load capacity:11300 lb; housing material:Carbon Steel - corro; manufacturer catalog number:1501208000; ball material:Alloy Steel - heat t; ball width:.8750 in; shank thread length:1.7190 in; head width:.6870 in; lubrication type:No Fitting; axial static load capacity:1130 lb; head diameter:1.7500 in; lubrication:Grease; |
| B7224-C-T-P4S FAG high precision ball bearings | material specification:SAE 660 (C932&#; sleeve bearing type:Plain Sleeve; operating temperature range:Maximum of +800; d:1/2 in; standards met:ASTM B584-78; maximum p value:3000 psi; groove/plug type:None; maximum pv value:75000; bearing material:Leaded-Tin Bronze; overall length:3/4 in; maximum v value:750 fp/min; D:3/4 in; |
| B71908-E-2RSD-T-P4S FAG precision ball bearings | roller shape:Wire Guide; stud length:2.0000 in; roller width:1.6875 in; roller material:Chrome Steel; bearing element:Balls - Two Rows; technical specifications:Click here; thread size:7/8-14; stud diameter:0.8750 in; closure type:Double Seal; radial static load capacity:2950 lb; point diameter:2.6250 in; roller diameter:2.9375 in; radial dynamic load capacity:5180 lb; |
| B7208-E-2RSD-T-P4S FAG high precision bearings | Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:7.718; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Tapered Adapter Sleeve; Housing Style:4 Bolt Square Flange Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Expansion; Mounting Bolts:3/4 Inch; Relubricatable:Yes; Insert Part Number:22217; Seals:Triple Lip Viton; |
| B7202-C-T-P4S FAG high precision ball bearings | lubrication type:Lubrication Fitting; locking device:Double Set Screw; overall length:15.2500 in; overall height:8.5000 in; B:5.0000 in; expansion type:Non-Expansion Bearin; mounting:Four-Bolt Base; finish/coating:Uncoated; operating temperature range:Max 250°; replacement bearing:RCI-307; bolt size:.7500 in; duty type:Standard Duty; base to bore centerline:4.5000 in; series:RPBXT; d:3.4375 in; |
HC7013-E-T-P4S FAG high precision bearings Video
HC7013-E-T-P4S-TBTL FAG • ABF Store
HC7013-E-T-P4S-TBTL FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service
Hc7013-e-t-p4s-ul FAG Angular Contact Ball Single Row for
Find many great new & used options and get the best deals for Hc7013-e-t-p4s-ul FAG Angular Contact Ball Single Row at the best online prices at eBay!
FAG HC7013.E.T.P4S.UL Spindle Bearings, Super-precision
Sun Rises Group Limited now brings quality FAG HC7013.E.T.P4S.UL Spindle Bearings, Super-precision Angular Contact Ball Bearing, 65x100x18mm at
Super Precision Bearings - Schaeffler
brands INA and FAG have been at the forefront of the ... FAG Super Precision Bearings for main spindles represent both the highest ... HC7013-E-T-P4S-UL
FAG spindle bearing HC7013-ET-P4S-UL,HC7013-ET-P4S
Products name. HC7013-E-T-P4S-UL FAG spindle bearing. Made in. Germany. dimensions. 65x100x18mm. Inner diameter. 65mm. Outer diameter. 100mm
Bearing HC7013-E-T-P4S (FAG) | Size and Specification
Spindle bearings HC7013-E-T-P4S. Bearing number : HC7013-E-T-P4S. Size (mm) : 65x100x18. Brand : FAG. Bore Diameter (mm) : 65. Outer Diameter (mm) :
HC7013-E-T-P4S-UL FAG • ABF Store
HC7013-E-T-P4S-UL FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in